Academy Multi-Powered Traction: Diesel-Electric vs. Hydraulic Loco Management
Sim HQ & Virtual Driving
Multi-Powered Traction: Diesel-Electric vs. Hydraulic Loco Management
The Transmission: The diesel engine block does not drive the wheels directly. Instead, the diesel motor spins a massive electric alternator. This alternator generates electricity, which is fed down to electric traction motors geared onto the wheel axles.
Driving Technique: When you open the throttle lever, you are telling the governor to pump more fuel into the diesel engine, revving it up to spin the alternator faster. You will experience a noticeable 3-to-5 second power lag while the engine builds RPMs before the electrical current flows to the wheels. Watch your ammeter gauge closely; if the current needle pushes deep into the red zone, you will overload the traction motors.
2. Diesel-Hydraulic (DH) Locomotive Management
Popular on historic European networks, hydraulic transmissions use fluid torque converters instead of electrical circuits.
The Transmission: The diesel engine spins an internal impeller wheel inside a sealed, oil-filled chamber. This spinning motion pumps oil against a secondary turbine wheel connected directly to mechanical drive shafts and gearboxes.
Driving Technique: Diesel-hydraulics provide an instant mechanical connection with no electrical power lag. However, changing gear ratios inside the hydraulic transmission causes sudden shifts in torque. When accelerating up steep lines, you must ease back on your throttle right as the transmission shifts gears to prevent violent wheel slips or structural engine damage.
Finished with this guide?
Join LopoRail to mark lessons complete and track your progress.