Academy Brake Test Regimes and EOT (End of Train) Device Telemetry
Sim HQ & Virtual Driving
Brake Test Regimes and EOT (End of Train) Device Telemetry
Charge the System: Move your automatic brake valve handle into the Release/Charge position. Monitor your dashboard gauges until your brake pipe pressure climbs to a stable 90 PSI (for US freight) or 5 Bar (for European networks).
The Reduction Step: Pull the brake lever back to execute a 10 PSI reduction. This vents air out of the main line, causing the brake valves on every individual wagon to apply their brake shoes.
Pound Leakage Verification: Move the brake handle into the Lap position to seal the system. Monitor the pressure gauges for one minute. If the line pressure drops by more than 5 PSI during that minute, your train has a severe air leak between wagons and cannot safely depart.
2. Reading End-of-Train (EOT) Telemetry
Long heavy haul freight trains can span over a mile in length, making it impossible for the driver to see the final wagon. Drivers rely on the digital display of the cab's Heads-Up Telemetry Unit (HOT), which links wirelessly to an End-of-Train (EOT) device mounted on the rear coupling hook.
[ CAB HOT BOX ] <---- Wireless Telemetry Link ----> [ REAR WAGON EOT DEVICE ]
(Reads: 87 PSI) (Measures Air Pipe Pressure)
Pressure Verification: The HOT box display shows the real-time brake pipe pressure at the very back of the train. If your cab gauge reads 90 PSI but your HOT box reads only 40 PSI, the air line is blocked or kinked somewhere along the train, meaning your rear brakes will not work.
Emergency Override: If the air line breaks or becomes blocked near the front of the train, applying the brakes from the cab will not slow down the rear wagons. In this critical situation, the driver can flip a protective guard switch on the console and press the Manual Emergency Flip Switch. This sends a radio command to the rear EOT device, forcing it to instantly dump air pressure from the back of the train, applying emergency braking forces from both ends simultaneously to stop a runaway event.
Finished with this guide?
Join LopoRail to mark lessons complete and track your progress.